Product
Rental Indoor & Outdoor Lightweight Front Maintenance Fast Installation LED Floor Display
Product Introduction
The floor screen independently developed by XYGLED adopts PC material (carbonate-based polymer) imported from Germany, which has high strength and elastic coefficient, high impact strength and good toughness. It can be used in a wide temperature range. High transparency and free dyeability: light brown or dark brown can be freely selected. Low molding shrinkage: good dimensional stability, low coefficient of thermal expansion and contraction. Good fatigue resistance: increased adhesive, good toughness, not easy to crack after repeated use. Good weather resistance: It is not easy to change color or crack under the change of temperature. Customized private mold, adding water guide groove, non-slip surface. The surface is frosted, wear-resistant and scratch-resistant. Increase the diffusion agent to achieve anti-dizziness, anti-UV, and increase the safety of guests.
The floor screen needs to be waterproofed regardless of whether it is indoors or outdoors. Our company’s indoor modules completely adopt outdoor standards. The screw holes are sealed with three-proof glue to ensure moisture-proof, waterproof and dust-proof to the greatest extent. The waterproof and dustproof coefficient of the surface can reach IP54 for the indoor model, and the front and back of the outdoor model have IP68 protection level. The number of load-bearing columns in each module is as many as 71, and adhesives are added to the material to ensure the toughness and strength of the load-bearing columns, not only can it guarantee the weight of 2600KGS/SQM, but it can also ensure that the tension generated when the heavy object goes up and down ensures that the column does not break (the tension will cause the column to break, and after the break, the module will crack when the weight is removed and put on it again) .
In order to ensure the load-bearing requirements, the module is designed as a suspended structure of the light board, and the load-bearing columns on the mask passes through the holes on the light board and directly inserts into the load-bearing holes of the bottom case. When the surface of the screen is under pressure, the pressure directly reaches the bottom case of the module through the load-bearing columns and then is distributed to the panel. The stress-bearing parts of the cabinet are designed with stiffeners to distribute the force on the surface evenly on the entire panel to the greatest extent, rather than at several points. Die-cast aluminum material better guarantees heat dissipation. Waterproof beading is used around the back cover to ensure that water vapor on the ground cannot enter the control box. The floor support is made of galvanized floor support instead of hard plastic, which increases the load-bearing effect.
The structure of the die-casting aluminum panel is designed to be installed on the wall and the ground. Each panel weighs 11kg. It is equipped with positioning pins and quick locks, which makes installation more convenient and has high installation accuracy. The consistency is good, and one type panel supports two installation methods, which is more cost-effective. The ultra-high-definition seamless stitching solution customized for XR and Film has received widespread attention and recognition around the world.
Product Fetures
Product Details
Product Specification
Rental Indoor & Outdoor LED Floor Display Specification
| Pixel Module composition |
P2.5 | P2.604 | P2.976 | P3.91 | P4.81 | P5.2 | P6.25 |
| Pixel composition | SMD LED 1R, 1G, 1B | SMD LED 1R, 1G, 1B | SMD LED 1R, 1G, 1B | SMD LED 1R, 1G, 1B | SMD LED 1R, 1G, 1B | SMD LED 1R, 1G, 1B | SMD LED 1R, 1G, 1B |
| Pixel pitch（W*H）mm | 2.5*2.5 | 2.604*2.604 | 2.976*2.976 | 3.91*3.91 | 4.81*4.81 | 5.2*5.2 | 6.25*6.25 |
| Module resolution（W*H） | 100*100 | 96*96 | 84*84 | 64*64 | 52*52 | 48*48 | 40*40 |
| Module size（W*H*D）mm | 250*250*18 | 250*250*18 | 250*250*18 | 250*250*18 | 250*250*18 | 250*250*18 | 250*250*18 |
| Module weight（KG） | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 |
| Panel unit composition | |||||||
| Contains modules qty（W*H） | 2*2 | 2*2 | 2*2 | 2*2 | 2*2 | 2*2 | 2*2 |
| Panel resolution（W*H） | 200*200 | 192*192 | 168*168 | 128*128 | 104*104 | 96*96 | 80*80 |
| Panel size（W*H*D）mm | 500*500*78 | 500*500*78 | 500*500*78 | 500*500*78 | 500*500*78 | 500*500*78 | 500*500*78 |
| Resolution（dot/㎡） | 160000 | 147456 | 112896 | 65536 | 43264 | 36864 | 25600 |
| Protection level | Indoor(front IP54，backIP43) | Indoor(front IP54，backIP43) | Indoor(front IP54，backIP43) | Indoor(front IP54，backIP43) | Indoor(front IP54，backIP43) | Indoor(front IP54，backIP43) | Indoor(front IP54，backIP43) |
| Panel flatness （mm） | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
| White balance brightness（nits） | Indoor ≥1300 | Indoor ≥1300 | Indoor ≥1300 | Indoor ≥1300 | Indoor ≥1300 | Indoor ≥1300 | Indoor ≥1300 |
| Color temperature（K） | 6000—9300 adjustable | 6000—9300 adjustable | 6000—9300 adjustable | 6000—9300 adjustable | 6000—9300 adjustable | 6000—9300 adjustable | 6000—9300 adjustable |
| View angle(°) | >120 | >120 | >120 | >120 | >120 | >120 | >120 |
| Electrical parameters | |||||||
| Power consumption (A/unit module) | DC 6 ∽7 | DC 6 ∽7 | DC 6 ∽7 | DC 6 ∽7 | DC 6 ∽7 | DC 6 ∽7 | DC 6 ∽7 |
| Peak power consumption (W/㎡) Average power consumption (W/㎡) |
800/300 | 800/300 | 800/300 | 800/300 | 800/300 | 800/300 | 800/300 |
| Power requirements | AC220V | AC220V | AC220V | AC220V | AC220V | AC220V | AC220V |
| Processing performance | |||||||
| Drive method | Constant current drive | Constant current drive | Constant current drive | Constant current drive | Constant current drive | Constant current drive | Constant current drive |
| Frame frequency（Hz） | 50&60 | 50&60 | 50&60 | 50&60 | 50&60 | 50&60 | 50&60 |
| Refresh @60Hz frame signal input | ≥3840 / ≥7680 | ≥3840 / ≥7680 | ≥3840 / ≥7680 | ≥3840 / ≥7680 | ≥3840 / ≥7680 | ≥3840 / ≥7680 | ≥3840 / ≥7680 |
| Use parameters | |||||||
| Life typical value (hrs) | 100000 | 100000 | 100,000 | 100000 | 100000 | 100,000 | 100000 |
| Work temperature(°C） | -20 — 55 | -20 — 55 | -20 — 55 | -20 — 55 | -20 — 55 | -20 — 55 | -20 — 55 |
| Storage temperature(°C） | -30 — 60 | -30 — 60 | -30 — 60 | -30 — 60 | -30 — 60 | -30 — 60 | -30 — 60 |
| Working humidity range (RH) without condensation | 10 - 90% | 10 - 90% | 10 - 90% | 10 - 90% | 10 - 90% | 10 - 90% | 10 - 90% |
| Storage humidity range (RH) without condensation | 10 - 95% | 10 - 95% | 10 - 95% | 10 - 95% | 10 - 95% | 10 - 95% | 10 - 95% |
| Defective ratio | ≤4/100000 | ≤4/100000 | ≤4/100000 | ≤4/100000 | ≤4/100000 | ≤4/100000 | ≤4/100000 |
| Screen surface color | Color consistency 95% (white transparent or brown) |
Color consistency 95% (white transparent or brown) |
Color consistency 95% (white transparent or brown) |
Color consistency 95% (white transparent or brown) |
Color consistency 95% (white transparent or brown) |
Color consistency 95% (white transparent or brown) |
Color consistency 95% (white transparent or brown) |
| Interaction | Interactive/Non-Interactive | Interactive/Non-Interactive | Interactive/Non-Interactive | Interactive/Non-Interactive | Interactive/Non-Interactive | Interactive/Non-Interactive | Interactive/Non-Interactive |
Application
Events, Wedding, Celebration, Media, Film Production, XR studio, Broadcast, Exhibitions, Stadiums, Auditoriums, Lecture halls, Multi-function halls, Meeting rooms, Performance halls, Bars, Virtual Event Stages, Theater, Press conferences, etc.
Projects
Product Introduction
The floor screen independently developed by XYGLED adopts PC material (carbonate-based polymer) imported from Germany, which has high strength and elastic coefficient, high impact strength and good toughness. It can be used in a wide temperature range. High transparency and free dyeability: light brown or dark brown can be freely selected. Low molding shrinkage: good dimensional stability, low coefficient of thermal expansion and contraction. Good fatigue resistance: increased adhesive, good toughness, not easy to crack after repeated use. Good weather resistance: It is not easy to change color or crack under the change of temperature. Customized private mold, adding water guide groove, non-slip surface. The surface is frosted, wear-resistant and scratch-resistant. Increase the diffusion agent to achieve anti-dizziness, anti-UV, and increase the safety of guests.
The floor screen needs to be waterproofed regardless of whether it is indoors or outdoors. Our company’s indoor modules completely adopt outdoor standards. The screw holes are sealed with three-proof glue to ensure moisture-proof, waterproof and dust-proof to the greatest extent. The waterproof and dustproof coefficient of the surface can reach IP54 for the indoor model, and the front and back of the outdoor model have IP68 protection level. The number of load-bearing columns in each module is as many as 71, and adhesives are added to the material to ensure the toughness and strength of the load-bearing columns, not only can it guarantee the weight of 2600KGS/SQM, but it can also ensure that the tension generated when the heavy object goes up and down ensures that the column does not break (the tension will cause the column to break, and after the break, the module will crack when the weight is removed and put on it again) .
In order to ensure the load-bearing requirements, the module is designed as a suspended structure of the light board, and the load-bearing columns on the mask passes through the holes on the light board and directly inserts into the load-bearing holes of the bottom case. When the surface of the screen is under pressure, the pressure directly reaches the bottom case of the module through the load-bearing columns and then is distributed to the panel. The stress-bearing parts of the cabinet are designed with stiffeners to distribute the force on the surface evenly on the entire panel to the greatest extent, rather than at several points. Die-cast aluminum material better guarantees heat dissipation. Waterproof beading is used around the back cover to ensure that water vapor on the ground cannot enter the control box. The floor support is made of galvanized floor support instead of hard plastic, which increases the load-bearing effect.
The structure of the die-casting aluminum panel is designed to be installed on the wall and the ground. Each panel weighs 11kg. It is equipped with positioning pins and quick locks, which makes installation more convenient and has high installation accuracy. The consistency is good, and one type panel supports two installation methods, which is more cost-effective. The ultra-high-definition seamless stitching solution customized for XR and Film has received widespread attention and recognition around the world.
Specifications
|
Pixel pitch |
Density(dot) |
Module size(mm) |
Module resolution |
Panel size(mm) |
Brightness(cd/m²) |
Refresh rate |
|
FR1.953 |
262144 |
250*250 |
128*128 |
500*500 |
1300-1500 |
3840/7680 |
|
FR2.5 |
160000 |
250*250 |
100*100 |
500*500 |
1300-1500 |
3840/7680 |
|
FR2.604 |
147456 |
250*250 |
96*96 |
500*500 |
1300-1500 |
3840/7680 |
|
FR2.976 |
112896 |
250*250 |
84*84 |
500*500 |
1300-1500 |
3840/7680 |
|
FR3.91 |
65536 |
250*250 |
64*64 |
500*500 |
1300-1500 |
3840/7680 |
