Indoor Led floor installation method

  • Flat installation: To directly install the cabinet on the floor support, Connecting the cabinets by floor support, no need to dig the ground.

Embedded installation: In order to make the floor screen as the same height as the ground on the horizontal direction, makes the installation more nice and tidy

  • Guide rail installation: Usually aluminum cabinet is used, request the height of the rail is less than 9 cm, no need the floor support.through the rail to control the gap between the connected cabinet.
  • Steel structure: To increase installation height, which is helpful for ventilation, heat dissipation, and drainage.it’s suitable for the site that the environment is moisture and high-humidity.

There are four ways to install an indoor led floor screen. The first and easiest way is to directly install the cabinet on the floor. support, connecting the cabinets by floor support, no need to dig the ground, arrange the floor support according to the width, and place it on the floor.

Secondly, put the cabinet next to the floor support, pay attention to the arrow direction. In the next step, all cabinet needs to be placed in the same direction. There are positioning posts on the floor support, and the cabinet has positioning holes, place the cabinet positioning holes aligned with the positioning post. Adjust the floor support, enable the whole screen tidy and nice.

Finally, place the power and network cables next to the screen. Connect the power cord (blue aviation plug), and network cable (white aviation plug) in order. Then decorate the part that is higher than the ground. The second method is to dig a hole of suitable size on the floor and then install the cabinets in order. All cabinet needs to be placed in the same direction. There are positioning posts on the floor support, and the cabinet has positioning holes. Place the cabinet positioning holes aligned with the positioning post. Adjust the floor support, enable the whole screen tidy and nice. After installation and debugging, the height of the led floor screen and the height of the floor are levels. The third is to use guide rail installation, usually aluminum cabinet is used. The height of the rail is less than 9 cm, so no need for floor support. The rail is arranged on the ground according to the size of the cabinet, and then the cabinet is installed on the rail. All cabinet needs to be placed in the same direction, without digging the floor. It can easily move the led floor screen anywhere.

The last method is to increase the installation height of the led floor screen. no need to dig the ground, arrange the floor support according to the width, and place it on the floor. Secondly, put the cabinet next to the floor support, pay attention to the arrow direction. In the next step, all cabinet needs to be placed in the same direction. There are positioning posts on the floor support, and the cabinet has positioning holes, place the cabinet positioning holes aligned with the positioning post. Adjust the floor support, enable the whole screen tidy, and nice which is helpful. For water-proof, moisture-proof, ventilation, heat dissipation, drainage, and other functions. It’s suitable for the site that the environment is moisture and high-humidity.